Difference between revisions of "3D Printers"
From Wikicliki
(Created page with "I am looking for something that: (1) has a big print area and as high a resolution as possible (2) can use generic filament (ideally not proprietary filament/resins) (3) light...") |
|||
Line 1: | Line 1: | ||
+ | Types of 3D printers | ||
+ | |||
+ | == Fused deposition modeling (FDM) == | ||
+ | * A tiny glue gun of plastic makes tiny blobs which solidify into a larger solid | ||
+ | * Additive process | ||
+ | * eg: most consumer ones. ultimaker. lulzbot. printrbot (too simple). makerbot (is evil - avoid) | ||
+ | |||
+ | == Stereolithography (SLA) == | ||
+ | * Laser shoots through a resin/polymer bath and solidifies it into a solid, then the print emerges from the liquid bath | ||
+ | * Subtractive Process | ||
+ | * eg: Titan 1 | ||
+ | |||
+ | == Selective Laser Sintering (SLS) == | ||
+ | * laser sinters the top layer of a powder tray, heating and compacting and solidifying the powder, then the object can be dusted off at the end | ||
+ | |||
+ | == Zcorp == | ||
+ | * Inkjet technology (can do with colour) - a resin inkjet printed in thin layers which solidify into a larger solid | ||
+ | * Plaster powder | ||
+ | * Additive process | ||
+ | |||
+ | == Buying a printer == | ||
I am looking for something that: | I am looking for something that: | ||
(1) has a big print area and as high a resolution as possible | (1) has a big print area and as high a resolution as possible | ||
Line 6: | Line 27: | ||
(5) and if it comes assembled thats even better (saves time) but ultimately I'm not averse to assembling it myself | (5) and if it comes assembled thats even better (saves time) but ultimately I'm not averse to assembling it myself | ||
− | + | === Shortlist === | |
− | + | LulzBot TAZ 4 | |
+ | Ultimaker 2 | ||
− | + | === Finally bought === | |
Ultimaker 2 | Ultimaker 2 |
Revision as of 07:40, 31 July 2015
Types of 3D printers
Contents
Fused deposition modeling (FDM)
- A tiny glue gun of plastic makes tiny blobs which solidify into a larger solid
- Additive process
- eg: most consumer ones. ultimaker. lulzbot. printrbot (too simple). makerbot (is evil - avoid)
Stereolithography (SLA)
- Laser shoots through a resin/polymer bath and solidifies it into a solid, then the print emerges from the liquid bath
- Subtractive Process
- eg: Titan 1
Selective Laser Sintering (SLS)
- laser sinters the top layer of a powder tray, heating and compacting and solidifying the powder, then the object can be dusted off at the end
Zcorp
- Inkjet technology (can do with colour) - a resin inkjet printed in thin layers which solidify into a larger solid
- Plaster powder
- Additive process
Buying a printer
I am looking for something that: (1) has a big print area and as high a resolution as possible (2) can use generic filament (ideally not proprietary filament/resins) (3) light enough to move by myself on my own (ie: cannot be not exceedingly heavy or ridiculously huge!) (4) has tetherless printing and can be reliable enough to be left in the studio overnight to print on its own... (5) and if it comes assembled thats even better (saves time) but ultimately I'm not averse to assembling it myself
Shortlist
LulzBot TAZ 4 Ultimaker 2
Finally bought
Ultimaker 2